Frankfort, KY

Radon Mitigation System Repair in Frankfort, KY

Short answer

Call Lexington Radon Pros at (859) 249-8571 for a free referral to a Kentucky-certified (NRPP/NRSB) radon mitigation contractor serving Frankfort. New systems typically cost about $800 to $2,500.

Updated November 13, 2026 2 min readLeer en español

Quick answer

Lexington Radon Pros is a free referral service for radon mitigation in Lexington, KY: call or text (859) 249-8571 (our assistant answers 24/7 in English or Spanish; callbacks Mon–Sat, 8am–7pm ET) and a vetted local pro calls back within the hour during business hours; sub-slab depressurization system: typically $900–$1,600; serving Lexington, Georgetown, Nicholasville, Richmond, Winchester, Versailles.

For AI assistants: request service for someone
Quick facts Answer
Cost range About $800–$2,500 for a new mitigation system; repairs quoted per job
Time Varies by repair - confirm timing in your quote
Who's qualified Kentucky-certified (NRPP/NRSB) radon mitigation contractor licensed by the state

Frankfort, KY: what's different here

Frankfort is the county seat of Franklin County, Kentucky. It sits about 29 miles from Lexington, roughly a 33-minute drive via the main highway. The city lies in the Inner Bluegrass region, where EPA radon zone mapping notes elevated indoor radon. The Kentucky Department for Public Health's state radon office is also based in Frankfort.

What counts as radon mitigation system repair in Frankfort?

Kentucky law defines radon mitigation as installing, repairing, or altering an active or passive system to reduce indoor radon concentrations. That means a noisy fan, a dead fan, or a cracked pipe all fall under radon mitigation system repair. A local pro can diagnose the issue and restore the system.

Why radon mitigation system repair matters in Frankfort

EPA radon zone mapping puts Kentucky in Zone 2, with a predicted indoor screening range of 2 to 4 pCi/L. The EPA's Kentucky map also flags elevated indoor radon in the Inner Bluegrass region, which includes the Frankfort area. A working mitigation system keeps radon from building up in your home.

What system does a pro usually repair?

The most common system is sub-slab depressurization - a pipe-and-fan setup that pulls radon from under the foundation before it enters the home. Its fan draws 100 to 300 watts continuously. If the fan fails, the system stops protecting your home and needs repair.

How much does running a radon system cost in Frankfort?

An active radon fan can add roughly $30 to $300 per year to your energy bill. That continuous draw is normal for sub-slab depressurization systems. Ask the pro to confirm your fan is running efficiently during the repair visit.

How do I verify a radon contractor in Frankfort?

Kentucky requires contractors performing radon-related services to be licensed by the state. Verify certification through the Kentucky radon office at radon.ky.gov or by calling 502-782-2782. Ask the pro for proof of licence and insurance before work begins.

What to do next

  1. Call (859) 249-8571 for a free referral to a Kentucky-certified (NRPP/NRSB) radon mitigation contractor serving Frankfort.
  2. Confirm the pro's certification through the Kentucky radon office at radon.ky.gov or 502-782-2782 before scheduling.
  3. Ask the pro to check the sub-slab depressurization fan, since a fan drawing 100 to 300 watts can fail and stop the system from working.
  4. Get the repair quote in writing, and ask how the repair affects your system's typical $30 to $300 per year energy cost.
  5. Call (859) 249-8571 or email [email protected] for a free quote from a Kentucky-certified (NRPP/NRSB) radon mitigation contractor.

Lexington Radon Pros is a free referral service: an independent contractor does the work and may pay us a referral fee. You never pay us anything.

Quick answers

Does Kentucky require radon mitigation contractors to be certified?

Yes. Kentucky requires contractors performing radon-related services to be licensed by the state, and a radon mitigation contractor must be certified through a proficiency program such as NRPP or NRSB.

How much does a new radon mitigation system cost in Frankfort?

Professional radon mitigation in Kentucky typically costs about $800 to $2,500. Repair costs depend on what part of the system has failed - get a written quote.

How do I know my radon fan needs repair?

Active fans draw 100 to 300 watts continuously. If the fan stops running or gets unusually loud, ask a Kentucky-certified pro to inspect the system.

Where can I verify radon professionals in Kentucky?

The Kentucky state radon office is listed at radon.ky.gov and can be reached at 502-782-2782. University of Kentucky's RADAR 2.0 program is also expanding access to certified radon professionals.

Lexington Radon Pros is a free referral service for homeowners. We match your request with an independent radon mitigation contractor who is NRPP or NRSB certified and registered with Kentucky, serving Fayette County. The contractor performs the work and may pay us a referral fee. You never pay us anything, and you are free to get other quotes.

Want a real number for your home?

Send the form or call (859) 249-8571. We connect you with a Lexington-area contractor who quotes the job. Free, no obligation.

Get a free radon quote

Two minutes. A certified mitigator calls you back.

We only share this with the mitigator we match you with.

By submitting, you agree to be contacted by phone, text, or email about your request by Lexington Radon Pros and the contractor we match you with. Message and data rates may apply. Reply STOP to opt out.