| Quick facts | Answer |
|---|---|
| Cost range | $1,200-$3,000 for a new mitigation system; inspection cost varies by home - confirm in your quote |
| Time | Frankfort is about 33 minutes from Lexington via US-60 |
| Who's qualified | Kentucky requires radon contractors to be state licensed; verify via radon.ky.gov or 502-782-2782 |
Frankfort, KY: what's different here
Frankfort is the state capital, located in Franklin County, Kentucky. It sits about 29 miles from Lexington, roughly a 33-minute drive via US-60, so certified pros from the Lexington area regularly work there. Kentucky's state radon office contact is also listed in Frankfort through the Department for Public Health. That makes Frankfort a natural hub for radon oversight and mitigation services in central Kentucky.
What does Kentucky law say about radon mitigation system inspection?
Under Kentucky law (309.450), the state board or its inspector may conduct inspections of mitigation system installations and measurement locations to ensure compliance with radon standards. An inspector may enter premises at reasonable times and require production of mitigation plans, sketches, diagnostic information, and other evidence.
Who can perform radon work in Frankfort?
Kentucky requires contractors performing radon-related services to be licensed by the state, and certified pros are often NRPP-certified Radon Mitigation Specialists. Mitigation systems are normally completed by a professional rather than as a DIY project. Verify any contractor through the state radon office at radon.ky.gov or 502-782-2782.
How much does a radon mitigation system cost in the Frankfort area?
A cost guide for the Lexington area, which serves Frankfort, puts the average mitigation system cost between $1,200 and $3,000. Budget for fan operation too: an active fan draws 100 to 300 watts continuously, adding roughly $30 to $300 per year to your energy bill.
What radon level should trigger action in my Frankfort home?
EPA and public-health guidance recommend mitigation when radon levels are above 4 pCi/L, and some groups advise considering action above 2 pCi/L. Test your home first so you know whether a mitigation system or an inspection of an existing system is the right step.
What to do next
- Test your home for radon first; act if levels are above 4 pCi/L, or consider action above 2 pCi/L.
- Verify any contractor's state license through the Kentucky radon office at radon.ky.gov or 502-782-2782.
- Ask the pro for proof of licence and insurance, plus their NRPP/NRSB certification, before work starts.
- Request an itemized quote covering the system, fan wattage, and expected energy cost of $30-$300 per year.
- Call (859) 249-8571 or email [email protected] for a free quote from a Kentucky-certified (NRPP/NRSB) radon mitigation contractor.
Lexington Radon Pros is a free referral service: an independent contractor does the work and may pay us a referral fee. You never pay us anything.
