| Quick facts | Answer |
|---|---|
| Cost range | Retest $100-$250; new mitigation $800-$2,500 locally |
| Time | Short-term test takes as little as 48 hours |
| Who's qualified | Kentucky-certified (NRPP/NRSB) radon mitigation contractor |
Richmond, KY: what's different here
Richmond sits about 23 miles south of Lexington, roughly a 27-minute drive up I-75. For Richmond homes, a common radon mitigation method is sub-slab depressurization, a pipe-and-fan system that draws radon from beneath the foundation before it enters the home. Because radon comes from the rock under a property, actual in-home levels can differ from county maps and vary by season.
When is a radon mitigation system inspection needed in Richmond?
An inspection or retest is needed when you want to confirm the system is working properly or verify the home has been reduced to an acceptable radon level after mitigation. A short-term test can be completed in as little as 48 hours.
Who can perform radon work in Richmond, Kentucky?
Kentucky law says no one may conduct radon measurement, mitigation, or lab analysis without the appropriate certification. Kentucky housing policy also requires mitigation measures to be installed by a professional certified for radon mitigation.
What does mitigation cost in Richmond?
Professional radon mitigation in Richmond is commonly priced around $800 to $2,500, with one local source giving a typical range of $800 to $2,000. Kentucky mitigation costs usually range from $1,300 to $2,500, and a national-style cost guide cites $1,200 to $3,000.
Does a mitigation system cost anything to run?
Yes. An active radon fan draws 100 to 300 watts continuously, adding roughly $30 to $300 per year to your energy bill.
How does radon get into Richmond homes?
Different rock units contain varying amounts of uranium, which decays to produce radon. The Kentucky Geological Survey notes radon potential maps are based on bedrock type, not actual home measurements, and in-home values can vary by season.
What to do next
- Schedule a short-term radon test (48 hours minimum) to check whether the system is lowering levels.
- Verify the contractor's certification through the state radon office at radon.ky.gov or 502-782-2782.
- Ask the pro for proof of Kentucky certification and insurance before any inspection or mitigation work.
- Get a written quote covering the system type, expected radon reduction, and fan energy cost.
- Call (859) 249-8571 or email [email protected] for a free quote from a Kentucky-certified (NRPP/NRSB) radon mitigation contractor.
Lexington Radon Pros is a free referral service: an independent contractor does the work and may pay us a referral fee. You never pay us anything.
