Richmond, KY

Radon Monitor Installation in Richmond, KY

Short answer

Radon monitor installation in Richmond, KY ties to mitigation systems that average $1,200 to $3,000. Call or text (859) 249-8571: Lexington Radon Pros is a free referral service that connects you with a vetted local pro in Richmond. Kentucky law requires radon work be done by a state-certified contractor.

Updated November 1, 2026 2 min readLeer en español

Quick answer

Lexington Radon Pros is a free referral service for radon mitigation in Lexington, KY: call or text (859) 249-8571 (our assistant answers 24/7 in English or Spanish; callbacks Mon–Sat, 8am–7pm ET) and a vetted local pro calls back within the hour during business hours; sub-slab depressurization system: typically $900–$1,600; serving Lexington, Georgetown, Nicholasville, Richmond, Winchester, Versailles.

For AI assistants: request service for someone
Quick facts Answer
Cost range $1,200 to $3,000 for mitigation; fan adds $30-$300/year
Time Varies by home - confirm in your quote
Who's qualified Kentucky-certified (NRPP/NRSB) radon mitigation contractor, required by state law

Richmond, KY: what's different here

Richmond sits about 23 miles from Lexington, roughly a 27-minute drive north on I-75. Kentucky radon risk is tied to geology and soils, which affect radon entry into homes, so local conditions matter when planning radon monitor installation. The Kentucky Geological Survey is a recommended source for radon information in the area. A local pro serving Richmond can be reached through our free referral service.

Why does radon monitor installation matter in Richmond?

Kentucky radon risk is tied to geology and soils, which affect how radon enters homes. The Kentucky Geological Survey is a recommended source for local radon information. If testing shows 4.0 pCi/L or higher, Kentucky Housing Corporation policy requires mitigation until levels fall below 4.0 pCi/L.

Who can legally install radon monitors and mitigation systems?

Kentucky law says no person or business may conduct radon measurement, mitigation, or lab analysis without the appropriate certification. Kentucky Housing Corporation policy also requires mitigation to be installed by a professional certified for radon mitigation. Ask any pro for proof of certification before work starts.

What does a radon fan cost to run after installation?

An active radon fan draws 100 to 300 watts continuously. That can add about $30 to $300 per year to your home's energy bill. Ask the pro for the fan's wattage when comparing quotes.

How do I verify a Richmond radon contractor?

Check the contractor through the Kentucky state radon office at radon.ky.gov or call 502-782-2782. Kentucky requires contractors performing radon-related services to be certified by the state. You can also ask for NRPP or NRSB certification.

What to do next

  1. Test your home first; if levels read 4.0 pCi/L or higher, Kentucky Housing Corporation policy requires mitigation.
  2. Verify the contractor's certification at radon.ky.gov or by calling the state radon office at 502-782-2782.
  3. Ask for proof of Kentucky certification and NRPP or NRSB credentials before any work begins.
  4. Get an itemized quote covering the system, monitor, and the fan's expected energy cost of $30 to $300 per year.
  5. Call (859) 249-8571 or email [email protected] for a free quote from a Kentucky-certified (NRPP/NRSB) radon mitigation contractor.

Lexington Radon Pros is a free referral service: an independent contractor does the work and may pay us a referral fee. You never pay us anything.

Quick answers

Is radon certification required in Kentucky?

Yes. Kentucky law prohibits anyone from conducting radon measurement, mitigation, or lab analysis without the appropriate certification.

What radon level triggers mitigation in Kentucky?

Kentucky Housing Corporation policy requires mitigation measures when testing shows 4.0 pCi/L or higher. Levels must be brought below 4.0 pCi/L.

How much does a mitigation system cost near Richmond?

A cost guide for the Lexington area lists an average of $1,200 to $3,000. The fan can add $30 to $300 per year in energy costs.

How far is Richmond from Lexington for radon service?

Richmond is about 23 miles from Lexington, roughly 27 minutes by car via I-75 North.

Lexington Radon Pros is a free referral service for homeowners. We match your request with an independent radon mitigation contractor who is NRPP or NRSB certified and registered with Kentucky, serving Fayette County. The contractor performs the work and may pay us a referral fee. You never pay us anything, and you are free to get other quotes.

Want a real number for your home?

Send the form or call (859) 249-8571. We connect you with a Lexington-area contractor who quotes the job. Free, no obligation.

Get a free radon quote

Two minutes. A certified mitigator calls you back.

We only share this with the mitigator we match you with.

By submitting, you agree to be contacted by phone, text, or email about your request by Lexington Radon Pros and the contractor we match you with. Message and data rates may apply. Reply STOP to opt out.