| Quick facts | Answer |
|---|---|
| Cost range | Typically $1,200 to $3,000 for a mitigation system |
| Time | Best done quickly once elevated radon is detected |
| Who's qualified | Kentucky-certified (NRPP/NRSB) radon mitigation contractor |
Georgetown, KY: what's different here
Georgetown sits about 15 miles north of Lexington, roughly an 18-minute drive via the main highway, so local pros cover both cities easily. Like much of central Kentucky, the area's soil conditions can contribute to radon entering homes through the foundation. If your current system isn't keeping radon down, a redesign by a state-licensed contractor is the recommended path. Georgetown homeowners can use the same state radon office resources as Lexington residents.
When does a radon mitigation system redesign make sense in Georgetown?
If a test still shows elevated radon after your current system has been running, a redesign may be needed to bring levels down. The American Lung Association guidance says elevated radon should be addressed quickly by a qualified professional. Have the pro confirm the cause before changing the setup.
What does a radon mitigation system redesign cost in Georgetown?
A cost guide for the Lexington area puts the average mitigation system cost between $1,200 and $3,000. A redesign may fall in or below that range depending on the existing parts that can be reused. Ask the contractor for a written quote before work starts.
How much does a radon fan add to my energy bill?
An active radon fan runs continuously and draws 100 to 300 watts. That can add about $30 to $300 per year to your home's energy bill. Factor this ongoing cost into your redesign decision.
Who can perform a radon mitigation system redesign in Georgetown?
Kentucky requires contractors performing radon-related services to be licensed by the state, and a certified pro may be an NRPP-certified Radon Mitigation Specialist. Ask the pro for proof of license and certification before work begins. Lexington Radon Pros refers you to a Kentucky-certified (NRPP/NRSB) radon mitigation contractor.
What to do next
- Run a radon test to confirm current levels before committing to a radon mitigation system redesign.
- Verify the contractor's certification through the Kentucky state radon office at radon.ky.gov or 502-782-2782.
- Request a written quote that lists the full redesign cost, expected in the $1,200 to $3,000 system range or lower if parts are reused.
- Ask the pro to estimate the ongoing fan energy cost, roughly $30 to $300 per year at 100 to 300 watts.
- Call (859) 249-8571 or email [email protected] for a free quote from a Kentucky-certified (NRPP/NRSB) radon mitigation contractor.
Lexington Radon Pros is a free referral service: an independent contractor does the work and may pay us a referral fee. You never pay us anything.
