| Quick facts | Answer |
|---|---|
| Cost range | Mitigation systems average $1,200 to $3,000 |
| Time | Varies by home - confirm in your quote |
| Who's qualified | Kentucky requires state-licensed radon contractors; ask for NRPP/NRSB certification |
Georgetown, KY: what's different here
Georgetown sits in Scott County, part of the Bluegrass region, which has naturally occurring elevated radon, and local sources identify the Georgetown area as a higher-risk pocket within the region. Kentucky Geological Survey radon potential maps are based on bedrock type, so actual readings in your home may vary by season. Georgetown is about 17 miles and roughly 28 minutes by car from Lexington via main highway, so a Lexington-based pro can reach you quickly.
How does radon get into well water in Georgetown, KY?
Kentucky health tracking says groundwater can contain radon, and if a well is your primary drinking source, radon can be present. The Bluegrass region, including Scott County where Georgetown sits, has naturally occurring elevated radon. Radon potential maps are based on bedrock type, not actual home measurements, and indoor values may vary by season.
How do I test for radon in well water in Georgetown?
The Kentucky Geological Survey has portable radon detectors capable of testing both soil and water for radon. Start with an indoor-air test: free radon detector kits are available through participating county libraries in the RADAR program, and many local health departments provide free kits. If indoor levels are high and you have a private well, the next step is to call the Safe Drinking Water program.
What radon level requires mitigation in Georgetown, KY?
Kentucky Housing Corporation policy requires mitigation if testing shows radon at or above 4.0 pCi/L. Mitigation must reduce levels below 4.0 pCi/L, and successful mitigation activities must be documented. Kentucky is EPA Radon Zone 2, with a predicted average indoor screening level between 2 and 4 pCi/L, though Scott County is a higher-risk local pocket.
What does radon mitigation cost in Georgetown?
Mitigation systems average between $1,200 and $3,000. Radon fan operation can add about $30 to $300 per year to the energy bill, because an active fan draws 100 to 300 watts continuously. Ask the pro for a written quote that covers the system, installation, and documentation of results.
Who is qualified to fix radon in well water near Georgetown?
Kentucky requires contractors performing radon-related services to be licensed by the state. Look for an NRPP-certified Radon Mitigation Specialist. You can verify Kentucky radon work through the state radon office at radon.ky.gov or by calling 502-782-2782.
What to do next
- Get a free radon test kit from a participating county library in the RADAR program or your local health department.
- If indoor radon is at or above 4.0 pCi/L and you have a private well, call the Safe Drinking Water program about well-water testing.
- Ask the pro for proof of state radon licensing and NRPP/NRSB certification, and verify through the state radon office at radon.ky.gov or 502-782-2782.
- Request a written quote covering the GAC filter or aeration system, installation, and documentation that levels are reduced below 4.0 pCi/L.
- Call (859) 249-8571 or email [email protected] for a free quote from a Kentucky-certified (NRPP/NRSB) radon mitigation contractor.
Lexington Radon Pros is a free referral service: an independent contractor does the work and may pay us a referral fee. You never pay us anything.
