| Quick facts | Answer |
|---|---|
| Cost range | Most systems $1,000 to $1,500; retrofits $800 to $2,500 |
| Time | Usually installed in less than a day |
| Who's qualified | Kentucky-certified (NRPP/NRSB) radon mitigation contractor required by law |
What makes radon mitigation cost more or less?
The EPA says cost depends on home size, design, and the reduction method needed. Costs can also vary based on location, square footage, foundation type, and radon gas level. Get an estimate from one or more qualified contractors before deciding.
Should I test before paying for mitigation?
Yes, testing comes first, because the only way to know if radon levels are elevated is to test. Kentucky CHFS says the test is simple and inexpensive. Free test kits are available through local health departments and by calling the Kentucky Radon Program at (502) 564-4856.
When is mitigation required or recommended?
EPA recommends installing a mitigation system if radon levels are above 4 pCi/L and considering action above 2 pCi/L. The Kentucky Housing Corporation requires a mitigation plan when indoor levels are at or above 4.0 pCi/L.
Could a radon fan raise my energy bill?
A radon mitigation fan can draw 100 to 300 watts continuously, roughly 876 kWh per year. HomeAdvisor says this can add about $30 to $300 to a home's annual energy bill.
What to do next
- Order a test kit from your local health department or call the Kentucky Radon Program at (502) 564-4856.
- If your result is 4.0 pCi/L or higher, request quotes from at least two certified contractors.
- Verify the contractor's Kentucky radon certification (NRPP or NRSB) before hiring.
- Ask each pro for proof of licence and insurance and a written quote that lists the system type and fan.
- Call (859) 249-8571 or email [email protected] for a free quote from a Kentucky-certified (NRPP/NRSB) radon mitigation contractor.
Lexington Radon Pros is a free referral service: an independent contractor does the work and may pay us a referral fee. You never pay us anything.
